BL ONE Select DUAL-S 2000 >90 BL Shine LED-Strip / BL Select / BL ONE Select Dual-S / BL ONE Select Dual-S >90
BL ONE Select Dual-S LED strip 1960lm/m 24VDC 20.1W/m IP20 930 5.04m available
Top Features
-
24Lamp voltage
-
4000Max. length
-
>90Colour rendering index CRI
-
1960Luminous flux per meter
- Doubles the life cycle thanks to double and independent LED channels
- doubles the life of 60000
- Developed and produced in Austria by BILTON LEDON
LED strip ONE Select Dual Safety 1960 lm/m 24VDC 20.1W/m 98lm/W IP20 CRI>90 3000K WHITE, two independent contacts, 2x connection cable 500 mm on both sides, 5.04 metres
LED module BL ONE Select DUAL-S 2000 >90
Article 100076
Linear LED light strip on a flexible circuit board. Installation using self-adhesive heat-conducting adhesive tape. Dimmable using BILTON LEDON Technology LED dimmer.
Suitable for ambient temperatures from -20 ... +45 at a service life of 60000 .
The BL ONE Select DUAL-S 2000 >90 LED-strip has a luminous flux of 1960 at 20.1 , resulting in an efficiency of 98 . At a nominal voltage of 24 DC on the connection, a maximum module length of 4000 can be achieved. In terms of lighting, the module has a colour temperature of 3000 and a beam angle of 120 . All this with a colour rendering index of >90 and a Binning selection based on SDCM3 (MacAdams). The light strip can be separated every 60 , resulting in a LED distance of 4.29 . Degree of protection IP20
Dimension (L x W x H): 5040 x 12 x 1.5
| Mechanical data | |
|---|---|
| Width | 12 |
| Length | 5040 |
| Height/depth | 1.5 |
| Model | Band |
| Self-adhesive | yes |
| Lamp type | LED nicht austauschbar |
| Distance | 4.29 |
| Distance relating to | LED zu LED |
| Degree of protection (IP) | IP20 |
| Length of particular segments | 60 |
| Lowest bending radius | 20 |
| Number of lamps per meter | 233 |
| Electrical data | |
|---|---|
| Protection class | III |
| Voltage type | DC |
| Lamp voltage | 24 |
| Imput voltage range | 23 - 25 |
| Lamp power per meter | 20.1 |
| Overall efficiency | 98 |
| Light technical data | |
|---|---|
| Beam angle | 120 |
| Colour rendering index CRI | >90 |
| Colour temperature | 3000 |
| Colour of light | White |
| Luminous flux per meter | 1960 |
| Energy efficiency class of teh built-in lamp | F |
| Colour consistency (McAdam ellipse) | SDCM3 |
| Connection | |
|---|---|
| Conductor cross section | 0.5 |
| Number of poles | 2 |
| Max. length | 4000 |
| Temperature technical data | |
|---|---|
| Ambient temperature during operating | - 20 ... + 45 |
| Rated life time L70/B10 at 25 °C | 60000 |
| Packaging information | |
|---|---|
| State of origin | AT |
| Customs tariff number | 94054099 |
| Gross width | 200 mm |
| Gross height | 22 mm |
| Gross length | 200 mm |
| Net width | 12 mm |
| Net height | 1.5 mm |
| Net length | 5040 mm |
* Information about the electrical and lighting technology measurements: Performance data measured after 1 min. at 25 °C ambient temperature and a light colour of 4,000 K (or RGB). These values can have a tolerance value of -/+ 10% (or -/+ 15 %at ECO / TWO / RGB / AIR ). Module length at 24 V input voltage at the module and luminous flux drop 10% over the specified length.