BLONE 2000 >90 LED modules / Indoor
BLO192000024DC20220930000W05 available
Top Features
-
24Lamp voltage
-
5500Max. length
-
>90Colour rendering index CRI
-
1980Luminous flux per meter
- Best light quality for shop lighting with CRI >90
- Improvement of homogeneity by 20 additional LEDs per meter
- Wide choice of light colors and lumen packages
- With a maximum module length of up to 5500 long, linear lighting lines can be implemented
- UL certification available
BL ONE 2000 LED strip 24VDC 20,2W/m IP20 CRI>90 3000K WHITE 5m
LED module BLONE 2000 >90
Article 101585
Linear LED light strip on a flexible circuit board. Installation using self-adhesive heat-conducting adhesive tape. Dimmable using BILTON LEDON Technology LED dimmer.
Suitable for ambient temperatures from -20 ... +45 at a service life of 60000 .
The BLONE 2000 >90 LED-strip has a luminous flux of 1980 at 20.2 , resulting in an efficiency of 98 . At a nominal voltage of 24 DC on the connection, a maximum module length of 5500 can be achieved. In terms of lighting, the module has a colour temperature of 3000 and a beam angle of 120 . All this with a colour rendering index of >90 and a Binning selection based on SDCM3 (MacAdams). The light strip can be separated every 50 , resulting in a LED distance of 7.14 . Degree of protection IP20
Dimension (L x W x H): 5000 x 8 x 1.5
| Mechanical data | |
|---|---|
| Width | 8 |
| Length | 5000 |
| Height/depth | 1.5 |
| Height | 1.5 |
| Colour | White |
| Model | Band |
| Self-adhesive | yes |
| Lamp type | LED nicht austauschbar |
| Distance | 7.14 |
| Distance relating to | LED zu LED |
| Degree of protection (IP) | IP20 |
| Length of particular segments | 50 |
| Lowest bending radius | 20 |
| With connection set | yes |
| With end piece | nein |
| Number of lamps per meter | 140 |
| Electrical data | |
|---|---|
| Protection class | III |
| Voltage type | DC |
| Lamp voltage | 24 |
| Imput voltage range | 23 - 25 |
| Lamp power per meter | 20.2 |
| Overall efficiency | 98 |
| Light technical data | |
|---|---|
| Beam angle | 120 |
| Colour rendering index CRI | >90 |
| Colour temperature | 3000 |
| Colour of light | White |
| Luminous flux per meter | 1980 |
| Energy efficiency class provided exchangeable built-in lamp | F |
| Colour consistency (McAdam ellipse) | SDCM3 |
| Connection | |
|---|---|
| Conductor cross section | 0.5 |
| Number of poles | 2 |
| Max. length | 5500 |
| Temperature technical data | |
|---|---|
| Ambient/storage temperature | - 5 ... + 55 |
| Operation temperature at Tc | - 5 ... + 60 |
| Ambient temperature during operating | - 20 ... + 45 |
| Rated life time L80/B10 at 25 °C | 60000 |
| Packaging information | |
|---|---|
| State of origin | AT |
| Customs tariff number | 94054099 |
| Net weight | 49 g |
| Gross weight | 175 g |
| Gross width | 200 mm |
| Gross height | 18 mm |
| Gross length | 200 mm |
| Net width | 8 mm |
| Net height | 1.5 mm |
| Net length | 5000 mm |
* Specifications of the electrical and photometric parameters: All values are valid in the thermally steady state at 25 ° C ambient temperature under the standardized measuring environment of BILTON. Nominal lumen values differ for different light colors, these values can be found in the respective data sheets. All values can have tolerances of +/- 15 %.