BLTW TWO LED modules / Specials / Indoor

Article no.: 101743


BL ONE Comfort Two LED strip 1300lm/m 12VDC 14W/m IP20 830-840 5m Colour Change not available

Datasheet

Top Features

  • 12
    Lamp voltage
  • 2000
    Max. length
  • >80
    Colour rendering index CRI
  • 1300
    Luminous flux per meter
  • Tuneable White (TW)e = selectable colour temperature in a wide range of white light
  • Physiologically valuable light (Human Centric Lighting)
  • Adaptation to the biorhythm using a suitable control system

LED strip Comfort Two 1300lm/m 12VDC, 14 W/m, IP20, CRI>80, 3000-4000K colour change, separability 25mm, incl. 12V plug with flat cable, 5 metres

LED module BLTW TWO

Article 101743

Linear LED light strip on a flexible circuit board. Installation using self-adhesive heat-conducting adhesive tape. Dimmable using BILTON LED dimmer.

Suitable for ambient temperatures from -20 ... +45 at a service life of 60000 .

The BLTW TWO LED-strip has a luminous flux of 1300 at 14 , resulting in an efficiency of 93 . At a nominal voltage of 12 DC on the connection, a maximum module length of 2000 can be achieved. In terms of lighting, the module has a colour temperature of 3000-4000 and a beam angle of 120 . All this with a colour rendering index of >80 and a Binning selection based on SDCM3 (MacAdams). The light strip can be separated every 25 , resulting in a LED distance of 8.3 . Degree of protection IP00

Dimension (L x W x H): 5000 x 8 x 1.1

  • 12
  • >80
  • IP00
  • 3000 - 4000
  • picto-Trash
  • picto-Rohs
  • picto-Ce
  • picto-Austria

Packaging information
State of origin AT
Customs tariff number 94054099
Net weight 49 g
Gross weight 175 g
Gross width 200 mm
Gross height 18 mm
Gross length 200 mm
Net width 8 mm
Net height 1.1 mm
Net length 5000 mm

* Information about the electrical and lighting technology measurements: Performance data measured after 1 min. at 25 °C ambient temperature and a light colour of 4,000 K (or RGB). These values can have a tolerance value of -/+ 15%. Module length at 24 V input voltage at the module and luminous flux drop 10% over the specified length.