BL ONE Select High-E 3000 BL Shine LED-Strip / BL Select / BL ONE Select High-E
BL ONE Select High-E LED strip 3000lm/m 24VDC 17.1W/m IP20 940 5m available
Top Features
-
24Lamp voltage
-
3000Max. length
-
>90Colour rendering index CRI
-
3000Luminous flux per meter
- Improvement of homogeneity by 20 additional LEDs per meter
- Wide choice of light colors and lumen packages
- Wide range of applications for linear lighting in white
- With a maximum module length of up to 3000 long, linear lighting lines can be implemented
LED strip High Efficiency 3000 lm/m 24VDC, 17.1 W/m, 175 lm/W, IP20, CRI>90, 4000K, connection cable 500 mm on both sides, 5 metres
LED module BL ONE Select High-E 3000
Article 102163
Linear LED light strip on a flexible circuit board. Installation using self-adhesive heat-conducting adhesive tape. Dimmable using BILTON LEDON Technology LED dimmer.
Suitable for ambient temperatures from -20 ... +45 at a service life of 60000 .
The BL ONE Select High-E 3000 LED-strip has a luminous flux of 3000 at 17.1 , resulting in an efficiency of 175 . At a nominal voltage of 24 DC on the connection, a maximum module length of 3000 can be achieved. In terms of lighting, the module has a colour temperature of 4000 and a beam angle of 120 . All this with a colour rendering index of >90 and a Binning selection based on SDCM3 (MacAdams). The light strip can be separated every 50 , resulting in a LED distance of 6.25 . Degree of protection IP20
Dimension (L x W x H): 5000 x 8 x 1.5
| Packaging information | |
|---|---|
| State of origin | AT |
| Customs tariff number | 85395100 |
| Net weight | 50 g |
| Gross weight | 175 g |
| Gross width | 200 mm |
| Gross height | 18 mm |
| Gross length | 200 mm |
| Net width | 8 mm |
| Net height | 1.5 mm |
| Net length | 5000 mm |
* Specifications of the electrical and photometric parameters: All values are valid in the thermally steady state at 25 ° C ambient temperature under the standardized measuring environment of BILTON. Nominal lumen values differ for different light colors, these values can be found in the respective data sheets. All values can have tolerances of +/- 15 %.