BL ONE Comfort TWO 1300 - Indoor IP20 BL Shine LED-Strip / BL ONE Comfort / BL ONE Comfort TWO / BL ONE Comfort TWO 1300
BL ONE Comfort Two LED strip 1300lm/m 12VDC 12W/m IP20 840 5m available
Top Features
-
12Lamp voltage
-
2000Max. length
-
>80Colour rendering index CRI
-
1300Luminous flux per meter
- High separability of 25 reduces cold spots
- Particularly suitable for furniture due to 12 DC voltage
- Flexible installation, with perfect corner lighting
- Also available in higher protection class IPX6
LED strip Comfort Two 1300lm/m 12VDC, 12 W/m, IP20, CRI>80, 4000K, separability 25mm, incl. 2-pole feeder 500 mm, 5 metres
LED module BL ONE Comfort TWO 1300 - Indoor IP20
Article 101738
Linear LED light strip on a flexible circuit board. Installation using self-adhesive heat-conducting adhesive tape. Dimmable using BILTON LEDON Technology LED dimmer.
Suitable for ambient temperatures from -20 ... +45 at a service life of 60000 .
The BL ONE Comfort TWO 1300 - Indoor IP20 LED-strip has a luminous flux of 1300 at 12 , resulting in an efficiency of 108 . At a nominal voltage of 12 DC on the connection, a maximum module length of 2000 can be achieved. In terms of lighting, the module has a colour temperature of 4000 and a beam angle of 120 . All this with a colour rendering index of >80 and a Binning selection based on SDCM3 (MacAdams). The light strip can be separated every 25 , resulting in a LED distance of 8.3 . Degree of protection IP20
Dimension (L x W x H): 5000 x 8 x 1.1
| Packaging information | |
|---|---|
| State of origin | AT |
| Customs tariff number | 94054099 |
| Net weight | 49 g |
| Gross weight | 175 g |
| Gross width | 200 mm |
| Gross height | 18 mm |
| Gross length | 200 mm |
| Net width | 8 mm |
| Net height | 1.1 mm |
| Net length | 5000 mm |
* Information about the electrical and lighting technology measurements: Performance data measured after 1 min. at 25 °C ambient temperature and a light colour of 4,000 K (or RGB). These values can have a tolerance value of -/+ 15%. Module length at 24 V input voltage at the module and luminous flux drop 10% over the specified length.
