BL ONE Select SOL BL Shine LED-Strip / BL Select / BL ONE Select SOL
BL ONE Select SOL LED strip 3000lm/m 24VDC 29W/m IP20 FS 4000K 5m available
Top Features
-
24Lamp voltage
-
4000Max. length
-
>98Colour rendering index CRI
-
3000Luminous flux per meter
- LED strips for light close to sunlight due to very high CRI
- For exceptional applications where natural light is needed.
LED strip ONE Select SOL 3000 lm/m 24VDC 29W/m 103lm/W IP20 CRI>98 4000K WHITE, separability 50mm, connection cable 500 mm on both sides, 5 metres
LED module BL ONE Select SOL
Article 100005
Linear LED light strip on a flexible circuit board. Installation using self-adhesive heat-conducting adhesive tape. Dimmable using BILTON LEDON Technology LED dimmer.
Suitable for ambient temperatures from -20 ... +45 at a service life of 60000 .
The BL ONE Select SOL LED-strip has a luminous flux of 3000 at 29 , resulting in an efficiency of 103 . At a nominal voltage of 24 DC on the connection, a maximum module length of 4000 can be achieved. In terms of lighting, the module has a colour temperature of 4000 and a beam angle of 120 . All this with a colour rendering index of >98 and a Binning selection based on SDCM3 (MacAdams). The light strip can be separated every 50 , resulting in a LED distance of 7.14 . Degree of protection IP20
Dimension (L x W x H): 5000 x 8 x 1.5
| Mechanical data | |
|---|---|
| Width | 8 |
| Length | 5000 |
| Height/depth | 1.5 |
| Height | 1.5 |
| Colour | White |
| Model | Band |
| Self-adhesive | yes |
| Lamp type | LED nicht austauschbar |
| Distance | 7.14 |
| Distance relating to | LED zu LED |
| Degree of protection (IP) | IP20 |
| Length of particular segments | 50 |
| Lowest bending radius | 20 |
| With connection set | yes |
| With end piece | yes |
| Number of lamps per meter | 140 |
| Electrical data | |
|---|---|
| Protection class | III |
| Voltage type | DC |
| Lamp voltage | 24 |
| Imput voltage range | 23 - 25 |
| Lamp power per meter | 29 |
| Overall efficiency | 103 |
| Light technical data | |
|---|---|
| Beam angle | 120 |
| Colour rendering index CRI | >98 |
| Colour temperature | 4000 |
| Colour of light | White |
| Luminous flux per meter | 3000 |
| Energy efficiency class provided exchangeable built-in lamp | G |
| Colour consistency (McAdam ellipse) | SDCM3 |
| Connection | |
|---|---|
| Conductor cross section | 0.5 |
| Number of poles | 2 |
| Max. length | 4000 |
| Temperature technical data | |
|---|---|
| Ambient temperature during operating | - 20 ... + 45 |
| Rated life time L80/B10 at 25 °C | 60000 |
| Packaging information | |
|---|---|
| State of origin | AT |
| Customs tariff number | 94054099 |
| Net weight | 49 g |
| Gross weight | 175 g |
| Gross width | 200 mm |
| Gross height | 18 mm |
| Gross length | 200 mm |
| Net width | 8 mm |
| Net height | 1.5 mm |
| Net length | 5000 mm |
* Specifications of the electrical and photometric parameters: All values are valid in the thermally steady state at 25 ° C ambient temperature under the standardized measuring environment of BILTON. Nominal lumen values differ for different light colors, these values can be found in the respective data sheets. All values can have tolerances of +/- 15 %.